Gyro-Trac Corporation is Proud to Announce Low Country JCB as a New Cutter-Head Dealer.


Chris Shea, Low Country JCB's OwnerJuly, 2017 Summerville, SC — FOR IMMEDIATE RELEASE – Gyro-Trac Corporation is proud to announce that it has appointed Low Country JCB as its newest Cutter-Head Dealer in the state of Georgia.

About Low Country JCB

Low Country JCB, also known as Low Country Machinery, opened its doors on August 1, 2001 in a single wide trailer on the JCB property with 14 employees servicing the Low Country. As the business continued to grow and expand, Low Country Machinery moved into its brand new facility adjacent to the JCB North American Headquarters in Pooler, GA just outside of Savannah.

We maintain a full selection of JCB construction equipment such as backhoes, excavators, telehandlers, wheel loaders, skid steers, rough terrain forklifts, Fastrac tractors and the all new JCB Teleskid. A compliment of quality new and used construction equipment, as well as equipment available for rent is always available along with parts and service solutions for many major brands. And now, we are very pleased to have the Gyro-Trac Cutter-head line to offer our customers the best mulching technology in the world.

Low Country JCB has a rather unique situation compared with other JCB equipment dealers throughout North America. Low Country JCB is located right next door to manufacturer JCB’s North American Headquarters in Pooler, Ga., near Savannah.

The 15,000-sq. ft. (1,393 sq m) dealership is leased from JCB on its manufacturing property. After opening for business back in 2001, Low Country JCB went through a few ownership changes over the years. Now, as the dealership celebrates its 15th year of business, new owner Chris Shea is ready to take Low Country JCB to even greater heights of success.

At Low Country JCB, we pride ourselves on our Rapid Response Service and strive to offer the highest level of customer support.

About Gyro-Trac Corporation

Gyro-Trac manufacturers purpose-built, tracked Mulching Machines from 140hp – 350hp and high-flow and low-flow cutter-heads for skid steers, excavators, tractor booms, and small track-hoes. Gyro-Trac’s patented Sabre Tooth cutting technology produces more mulch for less total cost than any competitor. GT’s BBS-XP Biomass Baler is the most powerful mulch baler in the world.

The foundation of Gyro-Trac’s superior performance begins with the new SABRE-TOOTH TECHNOLOGY. Gyro-Trac’s SABRE-TOOTH cutting technology improves on Gyro-Trac’s flagship “Planar” tooth platform. This new technology pulverizes wood into sawdust-like mulch while utilizing Less Weight, Less Energy and Less Fuel than any other cutting system in existence. The small, rapidly bio-degradable mulch left behind creates a “Park-like effect” and it won’t wick fire. Our new SABRE-TOOTH design uses a wider tooth for better cutting coverage. Instead a single “rib” under the tooth to control the bite, we now use two control ribs, each with a knockout to allow the chip to curl into the relief with no resistance. We place a splitter block between the ribs to further reduce the size of the chip. The system is designed to self-clean, requiring less maintenance, but more importantly, the tooth relief is cleared for the next bite, meaning fewer clogs and more productivity. Replacing teeth is faster and easier too, as there is only one bolt to remove. The bolt holds a friction block wedge, so the bolt does not warp, making it easy to remove.

Add to this superior cutting technology a perfectly tuned hydraulic recipe, and you can understand how Gyro-Trac’s machines can mulch more wood with Less Weight, Less Horsepower and Less Fuel than any of our competitors.

Gyro-Trac’s lighter weight and lower ground pressure leaves soil structures intact, eliminating erosion and runoff pollution. Gyro-Trac’s ease, and sometimes even eliminate the permitting process. Feeder roots of neighboring trees are not disturbed, saving the “keeper” trees from dying due to root damage from heavier competitive machines … so with Gyro-Trac, the cost of replacing these trees is eliminated.

Contact Gyro-Trac at 1 (866) 800-3900 or visit their website at

Share with your FB Friends!